Production News
-
24″ Seamless Stainless Steel Elbow
1. Size: Ensure that the elbow is indeed 24 inches in diameter. 2. Material: Look for high-quality stainless steel, such as 304 or 316, depending on the application. 316 stainless steel is more resistant to corrosion, making it suitable for marine or chemical applications. 3. Bend Angle: Elbows t...Read more -
Carbon Steel Elbows: A Comprehensive Guide
Carbon Steel Elbows: A Comprehensive Guide Introduction Carbon steel elbows are essential fittings in piping systems, designed to change the direction of fluid flow. They are widely used in various industries, including oil and gas, chemical processing, water treatment, and construction, due to t...Read more -
SORF Flange DN100 PN25 BS4504
SORF flange DN100 PN25 BS4504 1. SORF: stands for “Slip-On Raised Face”, this flange is designed to be slipped onto the pipe and welded, usually for low to medium pressure applications. 2. DN100: indicates the nominal diameter of the flange is 100 mm. 3. PN25: Indicates that the flang...Read more -
Carbon Steel Caps: A Comprehensive Guide
Carbon Steel Caps: A Comprehensive Guide Introduction Carbon steel caps are essential fittings used in piping systems to seal the ends of pipes. They are crucial for preventing the flow of fluids or gases, ensuring the integrity and safety of the piping system. Carbon steel caps are widely used i...Read more -
Plate Flange PN16 DN200
A plate flange DN200 PN16 refers to a specific type of flange used in piping systems. - DN200: This indicates the nominal diameter of the flange, which is 200 millimeters. “DN” stands for “Diameter Nominal,” a standard used to denote the size of pipes and fittings. - PN16:...Read more -
BS4504 PN10 DN100 A105 Flange
BS 4504 is a British Standard that specifies the dimensions, tolerances, and materials for flanges used in piping systems. The designation “PN16″ refers to the pressure rating of the flange, which indicates that it can handle a maximum pressure of 16 bar (approximately 232 psi) at a s...Read more -
10″ A105 WNRF Flange 150#
10 inch, weld neck (WN) flange, A105 material, and 150# (150 lbs) pressure rating WN A105 150# Flange Specifications 1. Nominal Diameter: 10 inches 2. Pressure Rating: 150# (150 lbs) 3. Material: A105 (Carbon Steel) 4. Flange Type: Weld Neck (WN) with Raised Face (RF) 5. Dimensions: - Outside Dia...Read more -
Stainless Steel Flanges: A Comprehensive Guide
Understanding Stainless Steel Flanges: A Comprehensive Guide Introduction Stainless steel flanges are critical components in various piping systems, used to connect pipes, valves, pumps, and other equipment. They provide a reliable and leak-proof connection, making them essential in industries su...Read more -
Blind RF Flange
A blind RF (radio frequency) flange is a flange used in RF and microwave applications to create a sealed connection that does not allow signals or fluids to pass through. It is essentially a flat plate with no openings used to cover the end of a waveguide, coaxial line or other RF component.Read more -
Seamless Carbon Steel End Cap 4″ SCH40
A seamless carbon steel end cap is a type of fitting used in piping systems to close the end of a pipe. These end caps are made from carbon steel and are manufactured without any seams, which enhances their strength and durability. Here are some key points about seamless carbon steel end caps: Ch...Read more -
Carbon Steel Bend LR 90Deg
“carbon steel bend LR SCH40 90deg, a long radius (LR) 90-degree elbow fitting made from carbon steel, with a schedule 40 (SCH40) wall thickness. 1. Carbon Steel: A type of steel that contains carbon as the primary alloying element. It is commonly used in piping and structural applications d...Read more -
JIS Flange
A JIS flange refers to a type of flange that conforms to the standards set by the Japanese Industrial Standards (JIS). These flanges are commonly used in piping systems and are designed to connect pipes, valves, pumps, and other equipment in various industrial applications. JIS flanges come in va...Read more